Centrifuge Tubes
Your valuable probes are in good hands with the centrifuge tubes from TPP!

Features of the TPP centrifuge tubes surpass ordinary tubes. They are:

  • manufactured with highest grade of raw material fulfilling requirements of USP Class VI
  • white writing circle, affixed on the screw cap, for easy labeling with any writing instrument
  • caps that cannot be over-tightened
  • gas and aerosol tight cap
  • graduations all the way down to 0.1 ml / 0.5 ml respectively
  • convenient racks available that are autoclavable and are collapsible for storage when not in use

The TPP centrifuge tubes are manufactured on automatic transport units. This guarantees that the products are carefully moved to the next work station within the manufacturing line quick and without unnecessary contamination risk.

Sub-operations such as printing, on-screwing of closure caps or tests for tightness are then performed in clean-room conditions.

Good to know!
Abstinence from Additives

TPP processes only the highest grade of virgin raw material that fulfill the requirements of USP Class VI.

No additives, slip agents, biocides or plasticisers are employed.

By this we prevent leaching of substances into the valuable probes of the tubes.

Centrifugal Acceleration (gx)
The limit on “gx” is influenced by:
  • type of rotor (diameter)
  • speed / revolution per minute

The maximum on “gx” depends on:

  • material of tubes
  • centrifugation probe (for ex. organic solvents)
Downloads
TypeProduct No.Graduations (ml)Volume max.
(ml)
VersionDimensions
(mm)
Materialmax. g-ForceQty / BagQty / CaseCase
(kg)
 91015 14 15 conical 17.1 x 120 PP 15'500 40 800 6.6
 91016 12 13 round, short 17.1 x 105 PP 15'500 40 800 6.4
 91017 15 15 round, long 17.1 x 120 PP 15'500 40 800 6.5
 91019 12 13 flat 17.1 x 100 PP 15'500 40 800 6.2
 91050 50 50 conical 30 x 115 PP 15'500 20 360 5.7
 91051 50 50 concial, with rim 30 x 115 PP 15'500 20 320 5.8
 91056 50 round 30 x 115 PP 15'500 20 360
 91115 14 15 conical 17.1 x 120 PS 1'700 40 800 7.3
------- ------- ------- Small packaging unit (smu) ------- ------- ------- ------- ------- -------
 91014 14 15 conical, smu 17.1 x 120 PP 15'500 40 360 3.1
 91054 50 50 conical, smu 50 PP 15'500 20 160 2.8
------- ------- ------- Racks filled ------- ------- ------- ------- ------- -------
 91515 14 15 15 ml, conical Rack "L", 30 x 15 ml PP 15'500 1 10 4.4
 91550 50 50 50 ml, conical Rack "L", 20 x 50 ml PP 15'500 1 10 5.3